CONCORD, Mass., Dec. 5, 2007 - The largest annual worldwide 3D CAD event will only get bigger this January when more than 4,000 SolidWorks users, partners, employees, and media representatives descend on San Diego for the 10 th anniversary of SolidWorks World - SolidWorks World 2008.
FRANKFURT, Germany, Dec. 5 /PRNewswire-FirstCall/ -- FARO Technologies, Inc. , the world sales leader in portable computer-aided measurement arms and laser trackers, announced that its strategic alliance with Renishaw has produced the FARO SENSOR, an advanced probe for measurement arms that increases user productivity and confidence in results.
Leuven, December 4th 2007 - Metris (MTRS, Euronext Brussels) announces the launch of the 7 axis MCA (manual coordinate measuring arm) for accurate and full freedom laser scanning. With this new 7 axis articulated arm, Metris offers a complete inspection and reverse engineering solution that can be used just as easily in the metrology laboratory as on the shop floor. Metris will demonstrate the 7 axis MCA in premiere at the 2007 Euromold show in Frankfurt, Germany.
EdgeCAM has released version 12 of its market-leading CAM system for NC part programming, which expands on its 5-axis machining capabilities and delivers improved CAD data management, faster toolpath generation and new options for hole cycle optimisation.
Paris, France November 28, 2007 - ESI Group (ESIN FR0004110310), a leading supplier of simulation software for prototyping and manufacturing processes, today announces its acceptance to the PLM MarketPlace after successfully completing the technical and business requirements. Dassault Syst¨¨mes' PLM MarketPlace is an online community that connects software development and business partners. Through PLM Marketplace, resellers can easily search and find complimentary solutions provided by Dassault Syst¨¨mes software partner community, on-demand, in order to present customers with a holistic PLM solution.
November 29, 2007 - Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, today announced that the international debut of its Connex500™ 3-D Printing System and PolyJet Matrix™ Technology will take place at the EuroMold 2007 show in Frankfurt, Germany.
ISRAEL, Nov 27, 2007 - SolidCAM, the leading provider of integrated CAM Software solutions for the manufacturing industry, will launch its new version InventorCAM 2008 at Autodesk University, which will take place in Las Vegas, USA from November 27 to 30, 2007.
Delcam will demonstrate the latest versions of its PowerMILL and FeatureCAM milling software on booth 5022-5024 during the PRI show to be held at the Orange Country Convention Center in Orlando, Florida, from 6th to 8th December. These two programs give Delcam the unrivalled ability to provide solutions to racing companies looking for programming systems for mills, mill/turn machines, lathes or wire EDM equipment.
Productivity and Interoperability Benefits Drive Leading Chinese Nuclear Design Institute's Decision to Increase Usage of Intergraph's Engineering Design and Enterprise Data Management Solutions
Delcam's PartMaker subsidiary has released version 8.5 of its PartMaker CADCAM software for the programming of CNC mills, lathes, wire EDM equipment, turn-mill centres and Swiss-type lathes. The new release features a variety of new functionality and enhanced capability all designed to make PartMaker users more productive across its full range of applications.
Andover, MA, United States, 11/19/2007 - As demand for new and innovative technology in the ERP industry grows, so does the need for extending the capabilities of Enterprise Software.
Framingham, MA - November 19, 2007 - Moldflow Corporation (NASDAQ: MFLO), the leading provider of software optimization solutions for the design and manufacture of plastic parts, today announced that the next International Moldflow User Group (iMUG) will be held May 20-22, 2008 in Detroit, Michigan at the Hyatt Regency Dearborn. Building on the success of events held during the past year - including Moldflow's international user groups held in Tokyo and Paris, regional user groups and technical road shows - all of which were attended by more than 1,700 customers, iMUG 2008 is shaping up to be the largest gathering of Moldflow users ever.
DP Technology, an innovator in the industry of computer-aided manufacturing (CAM), will showcase ESPRIT Mold Version 9 ¡ª the newest generation of its high-speed 3-axis and 5-axis CAM system ¡ª at EuroMold 2007, slated to take place Dec. 5-8 in Frankfurt/Main, Germany.
Rehovot, Israel - November 15, 2007 - Objet Geometries Ltd., the world leader in jetting ultra-thin layers of photopolymer, today announced its new PolyJet Matrix™ Technology, the first method that enables the simultaneous jetting of different types of model materials. This innovation opens up virtually unlimited opportunities for closely emulating the look, feel and function of final products, pioneering an entirely new direction in the 3-D printing of models, prototypes and manufactured parts.
Givat Shmuel, Israel - November 19, 2007 - A seminar on the topic of micro milling technology was held last week at Cimatron's offices in Givat Shmuel, Israel. The seminar was hosted by Cimatron, a leading provider of integrated, CAD/CAM solutions for tooling and manufacturing, and DMG, a leading provider of milling machines.
Santa Clara, Calif. - Agilent Technologies Inc. has released its Advanced Design System release 2008 EDA software platform for high-frequency, high-speed electronic design. Agilent says this release incorporates productivity breakthroughs for faster communications product design.
Company to leverage its Application Integration Architecture to deliver standards-based integration between recently acquired Agile product lifecycle management solutions and other Oracle applications.
Leuven, Belgium - LMS, the engineering innovation company, announced the Introduction of LMS Virtual.Lab Motion Rev 7 for vehicle ride and handling. LMS Virtual.Lab Motion offers dedicated solutions to simulate the ride and handling behavior of vehicles from passenger cars, to motor sports vehicles and up to commercial vehicles such as trucks and buses. With Rev 7, LMS Virtual.Lab Motion gains important new capabilities to simulate vehicle and driver interaction, to accelerate the creation of full-vehicle models and to smoothen the exchange of these models with other departments. Developed in cooperation with leading NASCAR series racing teams, LMS Virtual.Lab Motion Rev 7 also features a dedicated simulation solution for professional racing teams.
EdgeCAM has released version 12 of its market-leading CAM system for NC part programming, which expands on its 5-axis machining capabilities and delivers improved CAD data management, faster toolpath generation and new options for hole cycle optimisation.
November 29, 2007 - Objet Geometries Ltd., the world leader in ultra-thin layer photopolymer jetting, today announced that the international debut of its Connex500™ 3-D Printing System and PolyJet Matrix™ Technology will take place at the EuroMold 2007 show in Frankfurt, Germany.
ISRAEL, Nov 27, 2007 - SolidCAM, the leading provider of integrated CAM Software solutions for the manufacturing industry, will launch its new version InventorCAM 2008 at Autodesk University, which will take place in Las Vegas, USA from November 27 to 30, 2007.
Delcam will demonstrate the latest versions of its PowerMILL and FeatureCAM milling software on booth 5022-5024 during the PRI show to be held at the Orange Country Convention Center in Orlando, Florida, from 6th to 8th December. These two programs give Delcam the unrivalled ability to provide solutions to racing companies looking for programming systems for mills, mill/turn machines, lathes or wire EDM equipment.
Delcam's PartMaker subsidiary has released version 8.5 of its PartMaker CADCAM software for the programming of CNC mills, lathes, wire EDM equipment, turn-mill centres and Swiss-type lathes. The new release features a variety of new functionality and enhanced capability all designed to make PartMaker users more productive across its full range of applications.
DP Technology, an innovator in the industry of computer-aided manufacturing (CAM), will showcase ESPRIT Mold Version 9 ¡ª the newest generation of its high-speed 3-axis and 5-axis CAM system ¡ª at EuroMold 2007, slated to take place Dec. 5-8 in Frankfurt/Main, Germany.
Rehovot, Israel - November 15, 2007 - Objet Geometries Ltd., the world leader in jetting ultra-thin layers of photopolymer, today announced its new PolyJet Matrix™ Technology, the first method that enables the simultaneous jetting of different types of model materials. This innovation opens up virtually unlimited opportunities for closely emulating the look, feel and function of final products, pioneering an entirely new direction in the 3-D printing of models, prototypes and manufactured parts.
Santa Clara, Calif. - Agilent Technologies Inc. has released its Advanced Design System release 2008 EDA software platform for high-frequency, high-speed electronic design. Agilent says this release incorporates productivity breakthroughs for faster communications product design.
Leuven, Belgium - LMS, the engineering innovation company, announced the Introduction of LMS Virtual.Lab Motion Rev 7 for vehicle ride and handling. LMS Virtual.Lab Motion offers dedicated solutions to simulate the ride and handling behavior of vehicles from passenger cars, to motor sports vehicles and up to commercial vehicles such as trucks and buses. With Rev 7, LMS Virtual.Lab Motion gains important new capabilities to simulate vehicle and driver interaction, to accelerate the creation of full-vehicle models and to smoothen the exchange of these models with other departments. Developed in cooperation with leading NASCAR series racing teams, LMS Virtual.Lab Motion Rev 7 also features a dedicated simulation solution for professional racing teams.